|
Call ID |
Description |
Closing Notes |
|
15739 |
Rough Turn cycle and Side Groove (bore) does not conform to defined billet |
Use New Rough Turn cycle and In Process Stock |
|
39692 |
Turning operation regression - cannot pick entity for cycle start |
Fixed with the new operation. |
|
39700 |
Feed Mode - change of feed mode not correct (CAY) |
Fixed |
|
40171 |
New Turn Operations - Fails if no tool is selected - feed and speed |
Fixed |
|
43939 |
ToolStore - Specify Tip to Centre Line for bore tools |
Implemented |
|
49227 |
Simulator - The direction of some index moves is incorrect wrong/side/solution |
Fixed |
|
49503 |
Job Manager - Add [PROGID] and [PROGDESCR] to Job & Machine Parameters |
Fixed |
|
49521 |
Simulator - Option to remove chips - choose side of the stock |
New options to remove waste stock added |
|
51815 |
Turn Operation, comp left not processed |
Fixed with Finish Turning Operation |
|
52117 |
Transformed toolpath loses smoothed arcs - smashed lines |
Fixed |
|
53145 |
Turn Operation, comp left not processed |
Fixed with Finish Turning Operation |
|
53468 |
Include license agreement text in the installed software i.e. in the Help |
Obsolete. The latest license agreement is always available online. |
|
53866 |
Transformed toolpath loses smoothed arcs - smashed lines |
Fixed |
|
55106 |
Part Modeler - problem with Edgecam link when Japanese file name used |
Fixed |
|
55516 |
Default file save name is now part*.ppf |
Fixed |
|
56661 |
Simulator - The direction of some index moves are incorrect wrong/side/solution |
Fixed |
|
58147 |
Job Manager - Add [PROGID] and [PROGDESCR] to Job & Machine Parameters |
Fixed |
|
58448 |
CAD Links - Threading information fails on the attached Inventor model |
Fixed with the latest CAD Links |
|
59891 |
Simulator - Option to remove chips - choose side of the stock |
New options to remove waste stock added |
|
60055 |
Transformed toolpath loses smoothed arcs - smashed lines |
Fixed |
|
60057 |
Milling and Turning - Rapid approach to avoid X and Z overtravel |
Implemented |
|
60429 |
Milling and Turning - Rapid approach to avoid X and Z overtravel |
Implemented |
|
60725 |
Lathe Index - always realign CPL to "easier" B orientation |
Fixed |
|
60818 |
Enhancement - Fix Feed and Speed for a tool |
This is possible using different jobs that will have different technologies and Associative option on the toolchange. |
|
60825 |
Job Manager - Add [PROGID] and [PROGDESCR] to Job & Machine Parameters |
Fixed |
|
61232 |
Simulator - Option to remove chips - choose side of the stock |
New options to remove waste stock added |
|
61373 |
Simulator - The direction of some index moves is incorrect wrong/side/solution |
Fixed |
|
61546 |
Simulator - The direction of some index moves is incorrect wrong/side/solution |
Fixed |
|
61726 |
Simulator - Option to remove chips - choose side of the stock |
New options to remove waste stock added |
|
61791 |
Unsupported function when accessing materials dialog |
Fixed |
|
62280 |
Unsupported function when accessing materials dialog |
Fixed |
|
62595 |
Turning Operation - controller compensation not passed to cycle or NC code |
Now outputs correctly |
|
63110 |
Turn Operation, comp left not processed |
Fixed with Finish Turning Operation |
|
64219 |
Unable to select Rotary mode - unavailable on AC or AB machine |
|
|
64512 |
Edgecam cycles - Should warn if speed bigger than machine's maximum speed |
Completed with Speed Capping |
|
64534 |
Solids - Slow performance rendering and Intellisnapping big files |
Edgecam 2009 R2 is much faster when Intellisnapping big files, specially Granite (Pro/E) models. |
|
70511 |
Simulator - Option to remove chips - choose side of the stock |
New options to remove waste stock added |
|
70637 |
CAD Links - Creates empty XML if file name contains double-byte ASCII |
Fixed |
|
70981 |
Transformed toolpath loses smoothed arcs - smashed lines |
Fixed |
|
71393 |
Simulator - The direction of some index moves is incorrect wrong/side/solution |
Fixed |
|
71494 |
Simulator - The direction of some index moves is incorrect wrong/side/solution |
Fixed |
|
72444 |
Simulator - The direction of some index moves is incorrect wrong/side/solution |
Fixed |
|
72579 |
Profiling 2D - with XY offset applied get round corners only |
Profiling now corners correctly. |
|
73451 |
CAD Links - Inventor - Add support for assembly features and weldment assemblies |
Edgecam CAD Links now support Inventor assemblies and weldments |
|
73577 |
CAD Links Inventor (PM) - to bring OD/ID (external/internal) threads feature info |
Completed |
|
73624 |
Granite - Rendering and picking very slow on supplied part |
Improved |
|
73637 |
Templates - Remove duplicate high feed setting |
Fixed |
|
74340 |
ToolStore - Default priority is not passed to toolchange dialog at editing |
Fixed |
|
74900 |
Templates adaptive - allow for FPM/FPR when tapping |
Fixed |
|
74952 |
Simulator - Option to remove chips - choose side of the stock |
New options to remove waste stock added |
|
75316 |
Transformed toolpath loses smoothed arcs - smashed lines |
Fixed |
|
76007 |
Memory - Circular Project - Memory problem, failed to generate cycle (PMI) |
Fixed |
|
76137 |
5-axis and multiplane support for Huron-style rotary head (nutated) (orthogonal) |
Implemented in 2009R1 |
|
76396 |
Profiling - Short Link Step does not create good short links |
Fixed |
|
76416 |
CAD Links Inventor (PM) - to bring OD/ID (external/internal) threads feature info |
Completed |
|
76418 |
CAD Links - Threading information fails on the attached Inventor model |
Fixed with the latest CAD Links |
|
77316 |
Profiling - Apply Safe Distance does not work if linear lead is used |
Fixed |
|
77477 |
Solids - Slow performance rendering and Intellisnapping big files |
Edgecam 2009 R2 is much faster when Intellisnapping big files, specially Granite (Pro/E) models. |
|
77636 |
Enhancement - Fix Feed and Speed for a tool |
This is possible using different jobs that will have different technologies and Associative option on the toolchange. |
|
77650 |
Solids - Slow performance rendering and Intellisnapping big files |
Edgecam 2009 R2 is much faster when Intellisnapping big files, specially Granite (Pro/E) models. |
|
77970 |
Profiling 2D - with XY offset applied get round corners only |
Profiling now corners correctly |
|
77976 |
Transformed toolpath loses smoothed arcs - smashed lines |
Fixed |
|
78048 |
Feature Finder through a PCI - two extra layers are created if Holes only |
Completed |
|
78161 |
Plunge Roughing - 3D solid model as Stock Type, as in Roughing |
Implemented |
|
78188 |
Solids - Slow performance rendering and Intellisnapping big files |
Edgecam 2009 R2 is much faster when Intellisnapping big files, specially Granite (Pro/E) models. |
|
78196 |
Code Generator - Set system variable with 3D rapid state |
Completed - System variable is RAPID3D |
|
78375 |
Feature Find - 5-axis holes to be found in a AFR manner |
Implemented |
|
78836 |
Plunge Roughing - 3D solid model as Stock Type, as in Roughing |
Implemented |
|
78961 |
Profiling and Roughing - Do not follow Code Wizard's Rapid 3D setting |
Completed |
|
78987 |
Default file save name is now part*.ppf |
Fixed |
|
79089 |
Simulator - Option to remove chips - choose side of the stock |
New options to remove waste stock added |
|
79265 |
Code Generator - %INCLUDE to accept paths to .MAC files |
Fixed |
|
79497 |
Geometry from solids - helical edge only has one turn - not complete - Parasolid |
Fixed |
|
79575 |
Geometry from solids - helical edge only has one turn - not complete - Parasolid |
Fixed |
|
79698 |
Roughing Spiral - Ramp approach when using Pre-Drill? |
Fixed |
|
79870 |
Finish Turning - Unexpected approach in Y axis |
Fixed |
|
80035 |
Additional variables for spindle direction checks |
New system variables now available. |
|
80299 |
Finish Turning - a direct rapid approach type option is required |
Direct Rapid Approach option implemented |
|
80383 |
Edgecam - Machining Engine - Native 64-bit version |
Implemented |
|
80559 |
ToolStore - Default priority is not passed to toolchange dialog at editing |
Fixed |
|
80614 |
ToolStore - Default priority is not passed to toolchange dialog at editing |
Fixed |
|
80750 |
Finish Turning - a direct rapid approach type option is required |
Direct Rapid Approach option implemented |
|
80853 |
File Save As - Created file is 4 KB long when saving on the server (COPYSAVE) |
New checkbox on Options, Preferences |
|
80912 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
80922 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
81112 |
Insert merge & rationalise need to retain the original machine mating setup |
Original information now retained |
|
81123 |
5-axis and multiplane support for Huron-style rotary head (nutated) (orthogonal) |
Implemented in 2009R1 |
|
81449 |
Insert merge & rationalise need to retain the original machine mating setup |
Original information now retained |
|
81477 |
CAD Links - Threading information fails on the attached Inventor model |
Fixed with the latest CAD Links |
|
81487 |
CAD Links Inventor (PM) - to bring OD/ID (external/internal) threads feature info |
Completed |
|
81500 |
Geometry from solids - helical edge only has one turn - not complete - Parasolid |
Fixed |
|
81544 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
81608 |
Turning & boring tool shank graphic does not adhere to ISO standard |
F Distance implemented in ToolStore and Edgecam toolchange for improved turn & bore tool graphics |
|
81611 |
Geometry from solids - helical edge only has one turn - not complete - Parasolid |
Fixed |
|
81786 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
81846 |
ToolStore - Orientation buttons do not reset Spindle Direction (Reverse/Forward) |
Fixed |
|
81846 |
Change on Tool Mode does not update Spindle Direction |
Fixed |
|
81974 |
Finish Turning - a direct rapid approach type option is required |
Direct Rapid Approach option implemented |
|
81987 |
Simulator - Option to remove chips - choose side of the stock |
New options to remove waste stock added |
|
82066 |
Geometry from solids - helical edge only has one turn - not complete - Parasolid |
Fixed |
|
82136 |
Turn Operation, comp left not processed |
Fixed with Finish Turning Operation |
|
82210 |
Rough Turning - Prevent Undercuts on a checkbox as Finishing |
Implemented for New Rough Turn |
|
82273 |
Insert merge & rationalise need to retain the original machine mating setup |
Original information now retained |
|
82685 |
STEP translator fails to find features - Cylindrical faces are freeform - EC/PM |
STEP files that are saved as .pmods are no longer loaded into Edgecam as free form faces |
|
82693 |
Plunge Roughing - 3D solid model as Stock Type, as in Roughing |
Implemented. |
|
82705 |
5-axis and multiplane support for Huron-style rotary head (nutated) (orthogonal) |
Implemented in 2009R1 |
|
82748 |
Turning - driven tool milling cycles do not follow 3D Rapid setting |
Implemented |
|
82822 |
CLS losing connection to the Sentinel RMS License manager |
Fixed |
|
82946 |
CLS losing connection to the Sentinel RMS License manager |
Fixed |
|
83069 |
Editor - double-click opens two instances of the same file |
Fixed |
|
83098 |
Editor - double-click opens two instances of the same file |
Fixed |
|
83118 |
Adaptive Templates - to support Feed Type changes on the same tool |
Implemented |
|
83200 |
STEP translator fails to find features - Cylindrical faces are freeform - EC/PM |
STEP files that are saved as .pmods are no longer loaded into Edgecam as free form faces |
|
83300 |
Plunge Roughing - 3D solid model as Stock Type, as in Roughing |
Implemented |
|
83334 |
Profiling Undercut - tool crosses the part [gouge, scrap] [tolerance] |
Fixed |
|
83336 |
Simulator - Option to remove chips - choose side of the stock |
New options to remove waste stock added |
|
83496 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
83514 |
Lathe Index always realign CPL to "easier" B orientation |
Fixed |
|
83632 |
CAD Links Solid Edge - "Unspecified error" found. XML empty |
Fixed |
|
83690 |
Templates adaptive mill - Similar holes should be grouped in cycles |
The holes are not all the same, and that is why a different cycle is called for each of them. |
|
84064 |
File Save As - Created file is 4 KB long when saving on the server (COPYSAVE) |
New checkbox on Options, Preferences |
|
84074 |
CLS staying in memory too long and eating resources |
Fixed |
|
84128 |
CLS losing connection to the Sentinel RMS License manager |
Fixed |
|
84130 |
CLS losing connection to the Sentinel RMS License manager |
Fixed |
|
84304 |
Transformed toolpath loses smoothed arcs - smashed lines |
Fixed |
|
84338 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
84377 |
Plunge Roughing - 3D solid model as Stock Type, as in Roughing |
Implemented. |
|
84563 |
Rough Turning - Prevent Undercuts on a checkbox as Finishing |
Implemented for New Rough Turn |
|
84683 |
Transformed toolpath loses smoothed arcs - smashed lines |
Fixed |
|
84759 |
Sort Priority not passed from ToolStore to Edgecam |
Completed |
|
84773 |
Finish Turning - Direct rapid approach type option required |
Direct Rapid Approach option implemented |
|
84841 |
CLS does not start correctly with master location set to network path |
CLS now installed in separate location, resolving this issue. |
|
84846 |
5-Axis - To check machine limits in nutated |
Fixed |
|
84977 |
Finish Turning - Direct rapid approach type option required |
Direct Rapid Approach option implemented |
|
84985 |
Profiling and Roughing - Do not follow Code Wizard's Rapid 3D setting |
Completed |
|
84999 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
85058 |
Insert merge & rationalise need to retain the original machine mating setup |
Original information now retained |
|
85087 |
Stock and GL - poor performance when zooming/panning/rotating attached STL file [slow] |
Improved |
|
85187 |
Insert merge & rationalise need to retain the original machine mating setup |
Original information now retained |
|
85188 |
Insert merge & rationalise need to retain the original machine mating setup |
Original information now retained |
|
85211 |
Finish Turning - Direct rapid approach type option required |
Direct Rapid Approach option implemented |
|
85240 |
Lathe Setup - Copy the main spindle CPLs to the sub-spindle |
The "Index to" CPLs are copied to the sub-spindle |
|
85276 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
85353 |
Rough Turning - Prevent Undercuts on a checkbox as Finishing |
Implemented for New Rough Turn |
|
85445 |
Simulator - Option to remove chips - choose side of the stock |
New options to remove waste stock added |
|
85543 |
5-Axis - To check machine limits in nutated |
Fixed |
|
85545 |
Insert merge & rationalise need to retain the original machine mating setup |
Original information now retained |
|
85597 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
85696 |
File Save As - Created file is 4 KB long when saving on the server (COPYSAVE) |
New checkbox on Options, Preferences |
|
85702 |
Adaptive Templates Milling - ToolStore user fields to the Set Tooling Data List |
Fixed |
|
85788 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
85856 |
Profiling - Lead Out gouges solid part with offset |
Fixed |
|
85927 |
Finish Turning - VMC feeds entered but co-linear removal means no output |
Fixed |
|
86031 |
Thread Operation - Tool should be set to Feed/Rev |
Fixed |
|
86410 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
86413 |
5-Axis - To check machine limits in nutated |
Fixed |
|
86466 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
86542 |
Geometry from solids - helical edge only has one turn - not complete - Parasolid |
Fixed |
|
86756 |
Additional variables for spindle direction checks |
New system variables now available |
|
86761 |
Additional variables for spindle direction checks |
New system variables now available |
|
86917 |
Finish Turning - Direct rapid approach type option required |
Direct Rapid Approach option implemented |
|
87101 |
Finish Turning - Direct rapid approach type option required |
Direct Rapid Approach option implemented |
|
87105 |
Finish Turning - Direct rapid approach type option required |
Direct Rapid Approach option implemented |
|
87108 |
Finish Turning - Direct rapid approach type option required |
Direct Rapid Approach option implemented |
|
87109 |
Finish Turning - Direct rapid approach type option required |
Direct Rapid Approach option implemented |
|
87110 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
87143 |
5-Axis - To check machine limits in nutated |
Fixed |
|
87193 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
87319 |
Stock and GL - poor performance when zooming/panning/rotating attached STL file [slow] |
Improved |
|
87320 |
Plunge Roughing - 3D solid model as Stock Type, as in Roughing |
Implemented |
|
87322 |
Profiling Undercut - tool crosses the part [gouge, scrap] [tolerance] |
Fixed |
|
87323 |
Insert merge & rationalise need to retain the original machine mating setup |
Original information now retained |
|
87348 |
Plunge Roughing - 3D solid model as Stock Type, as in Roughing |
Implemented |
|
87516 |
Simulator - Option to remove chips - choose side of the stock |
New options to remove waste stock added |
|
87564 |
Finish Turning - Direct rapid approach type option required |
Direct Rapid Approach option implemented |
|
87668 |
Inventor CAD Links - Thread not transferred due to hole placement |
Fixed with 2009 R2 CAD Links |
|
87695 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
87701 |
Edgecam - Machining Engine - Native 64-bit version |
Implemented |
|
87731 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
87774 |
5-Axis - To check machine limits in nutated |
Fixed |
|
87783 |
Option for %output to use dot . instead of dash - |
Implemented |
|
87845 |
Finish Turning - Direct rapid approach type option required |
Direct Rapid Approach option implemented |
|
87889 |
Geometry from solids - helical edge only has one turn - not complete - Parasolid |
Fixed |
|
87918 |
STEP translator fails to find features - Cylindrical faces are freeform - EC/PM |
STEP files that are saved as .pmods are no longer loaded into Edgecam as free form faces |
|
87971 |
File Save As - Created file is 4 KB long when saving on the server (COPYSAVE) |
New checkbox on Options, Preferences |
|
88120 |
Simulator - Option to remove chips - choose side of the stock |
New options to remove waste stock added |
|
88148 |
STEP translator fails to find features - Cylindrical faces are freeform - EC/PM |
STEP files that are saved as .pmods are no longer loaded into Edgecam as free form faces |
|
88164 |
ToolStore - Populating toolchange numeric fields in scientific notation |
Fixed |
|
88182 |
5-Axis Operation - Develop 'Between 2 Curves/Surfaces' operation |
Completed |
|
88228 |
Finish Turning - Direct rapid approach type option required |
Direct Rapid Approach option implemented |
|
88230 |
CAD Links - Writes an empty XML if file contains Japanese characters |
Fixed |
|
88453 |
Simulator - The direction of some index moves is incorrect wrong/side/solution |
Fixed |
|
88462 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
88463 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
88476 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
88571 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
88614 |
Inventor CAD Links - Thread not transferred due to hole Placement |
Fixed with 2009 R2 CAD Links |
|
88746 |
5-Axis - To check machine limits in nutated |
Fixed |
|
88752 |
5 Axis - To check machine limits in nutated |
Fixed |
|
88820 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
88871 |
Edgecam - Machining Engine - Native 64-bit version |
Implemented |
|
88922 |
STEP translator fails to find features - Cylindrical faces are freeform - EC/PM |
STEP files that are saved as .pmods are no longer loaded into Edgecam as free form faces |
|
88965 |
Unable to select Rotary mode - Unavailable on AC or AB machine |
|
|
89111 |
Plunge Roughing - 3D solid model as Stock Type, as in Roughing |
Implemented |
|
89185 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
89202 |
Edgecam - Machining Engine - Native 64-bit version |
Implemented |
|
89238 |
Edgecam - Machining Engine - Native 64-bit version |
Implemented |
|
89239 |
Edgecam - Machining Engine - Native 64-bit version |
Implemented |
|
89240 |
Edgecam - Machining Engine - Native 64-bit version |
Implemented |
|
89346 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
89436 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
89527 |
Geometry from solids - helical edge only has one turn - not complete - Parasolid |
Fixed |
|
89637 |
Profiling 2D - With XY offset applied get round corners only |
Profiling now corners correctly |
|
89717 |
Milling and Turning - Rapid Approach to avoid X and Z overtravel |
Implemented |
|
89756 |
Edgecam - Machining Engine - Native 64-bit version |
Implemented |
|
89845 |
Turning Operation - Back Off is wrongly applied to a lower turret |
Fixed by new Operations |
|
90091 |
Insert merge & rationalise need to retain the original machine mating setup |
Original information now retained |
|
90199 |
Finish Turning - VMC feeds entered but co-linear removal means no output |
Fixed |
|
90214 |
Solids - Slow performance rendering and Intellisnapping big files |
Edgecam 2009 R2 is much faster when Intellisnapping big files, specially Granite (Pro/E) models |
|
90227 |
5-axis and multiplane support for Huron-style rotary head (nutated) (orthogonal) |
Implemented in 2009R1 |
|
90243 |
5-Axis - Edgecam does not warn of "Out of Limits" |
Fixed |
|
90291 |
Edgecam - Machining Engine - Native 64-bit version |
Implemented |
|
90296 |
File Save As - Created file is 4 KB long when saving on the server (COPYSAVE) |
New checkbox on Options, Preferences |
|
90343 |
Attached part fails to regenerate |
Now regenerates correctly |
|
90469 |
Turning & boring tool shank graphic does not adhere to ISO standard |
F Distance implemented in ToolStore and Edgecam toolchange for improved turn & bore tool graphics |
|
90513 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
90539 |
Finish Turning - VMC feeds entered but co-linear removal means no output |
Fixed |
|
90581 |
Edgecam - Machining Engine - Native 64-bit version |
Implemented |
|
90612 |
ToolStore - Orientation buttons do not reset Spindle Direction (Reverse/Forward) |
Fixed |
|
90612 |
Change on Tool Mode does not update Spindle Direction |
Fixed |
|
90634 |
Open Pockets - Flat Land Finishing to support them |
Implemented for the Flat Land Finishing cycle only |
|
90647 |
File Save As - Created file is 4 KB long when saving on the server (COPYSAVE) |
New checkbox on Options, Preferences |
|
90775 |
Simulator - The direction of some index moves is incorrect wrong/side/solution |
Fixed |
|
90972 |
Edgecam - Machining Engine - Native 64-bit version |
Implemented |
|
91018 |
Finish Turning - VMC feeds entered but co-linear removal means no output |
Fixed |
|
91033 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
91167 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
91269 |
Adaptive Turning Templates - Ability to reverse Y Axis Sign (main and sub-spindle) |
Implemented |
|
91374 |
Flat Land Finishing - Remove rolling around edges (rollover) |
Fixed for 2009R2 |
|
91388 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
91478 |
5-axis and multiplane support for Huron-style rotary head (nutated) (orthogonal) |
Implemented in 2009R1 |
|
91494 |
Finish Turning - Tool mounted at angle should approach ortho to MC axes |
|
|
91669 |
Solids - Slow performance rendering and Intellisnapping big files |
Edgecam 2009 R2 is much faster when Intellisnapping big files, specially Granite (Pro/E) models. |
|
91761 |
Transformed toolpath loses smoothed arcs - smashed lines |
Fixed |
|
91828 |
Open Pockets - Flat Land Finishing to support them |
Implemented for the Flat Land Finishing cycle only |
|
91975 |
Pro/E Granite - New Hole Feature not found due to incorrect visibility test |
This is a bug with Pro/E. |
|
92003 |
Template Adaptive TNC- Multi-depth not allowed when cycle Z depth is incremental |
A new token is available in hole cycle points, Z-LEVEL |
|
92008 |
STEP file has all faces as free forms |
STEP files that are saved as .pmods are no longer loaded into Edgecam as free form faces |
|
92088 |
5-axis - Update online help for Maximum Point Separation |
Help updated |
|
92089 |
Profiling 2D - With XY offset applied get round corners only |
Profiling now corners correctly |
|
92203 |
Geometry from solids - helical edge only has one turn - not complete - Parasolid |
Fixed |
|
92420 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
92489 |
Rough Turn cycle and Side Grove (bore) does not conform to defined billet |
Use New Rough Turn and In Process Stock |
|
92533 |
Edgecam cycles - Should warn if speed bigger than machine's maximum speed |
Completed with Speed Capping |
|
92629 |
Job Manager - Add [PROGID] and [PROGDESCR] to Job & Machine Parameters |
Fixed |
|
92729 |
5-axis and multiplane support for Huron-style rotary head (nutated) (orthogonal) |
Implemented in 2009R1 |
|
92888 |
Edgecam - Machining Engine - Native 64-bit version |
Implemented |
|
92914 |
Head/Table Index - Aligns CPL when not necessary |
Completed |
|
92927 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
92947 |
Milling and Turning - Rapid approach to avoid X and Z overtravel |
Implemented |
|
93068 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 6-bit version implemented |
|
93083 |
Finish Turning - VMC feeds entered but co-linear removal means no output |
Fixed |
|
93124 |
Pro/E Granite - New Hole Feature not found due to incorrect visibility test |
This is a bug with Pro/E |
|
93132 |
Job Reports - To add new field Holder Type as an available column |
Implemented |
|
93153 |
File Save As - Created file is 4 KB long when saving on the server (COPYSAVE) |
New checkbox on Options, Preferences |
|
93311 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
93329 |
Straight Turning Operation - Link type is always feed in the toolpath |
Fixed |
|
93347 |
New Rough Turn - Implement compensation options |
Implemented |
|
93355 |
5-axis and multiplane support for Huron-style rotary head (nutated) (orthogonal) |
Implemented in 2009R1 |
|
93382 |
Insert merge & rationalise need to retain the original machine mating setup |
Original information now retained |
|
93385 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
93418 |
Finish Turning - VMC feeds entered but co-linear removal means no output |
Fixed |
|
93421 |
Profiling - Lead Out gouges solid part with offset |
Fixed |
|
93422 |
Simulator - The direction of some index moves is incorrect wrong/side/solution |
Fixed |
|
93423 |
Profiling - Lead Out gouges solid part with offset |
Fixed |
|
93467 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
93700 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
93736 |
Template Adaptive TNC- Multi-depth not allowed when cycle Z depth is incremental |
A new token is available in hole cycle points, Z-LEVEL |
|
93761 |
Plunge Roughing - 3D solid model as Stock Type, as in Roughing |
Implemented |
|
93930 |
Advanced Turning - add safe docking positional command for upper/lower turrets |
Implemented |
|
94029 |
5-Axis - Part Co-ordinates - First approach rapid move has negative values |
Fixed |
|
94080 |
Geometry from solids - helical edge only has one turn - not complete - Parasolid |
Fixed |
|
94123 |
PCI - Request for a directive to ShellExecute any EXE |
Implemented |
|
94138 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
94244 |
New Rough Turn - Implement compensation options |
Implemented |
|
94287 |
Templates Adaptive TNC - Request for cycle number token for hole cycles |
Done. New token for cycle number and new token for cycle name/definition/comment. They are set to the default (from TNC manuals)... |
|
94463 |
Simulator - The direction of some index moves is incorrect wrong/side/solution |
Fixed |
|
94570 |
New Rough Turn - Implement compensation options |
Implemented |
|
94571 |
Pro/E Granite - New Hole Feature not found due to incorrect visibility test |
This is a bug with Pro/E |
|
94575 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
94598 |
Finish Turning - Mot machining to the end of geometry |
|
|
94613 |
Sort Priority not passed from ToolStore to Edgecam |
Completed |
|
94828 |
ToolStore - Orientation buttons do not reset Spindle Direction (Reverse/Forward) |
Fixed |
|
94828 |
Change on Tool Mode does not update Spindle Direction |
Fixed |
|
94851 |
STEP file has all faces as free forms |
STEP files that are saved as .pmods are no longer loaded into Edgecam as free form faces |
|
94936 |
Finish Turning - VMC feeds entered but co-linear removal means no output |
Fixed |
|
94994 |
Pro/E Granite - New Hole Feature not found due to incorrect visibility test |
This is a bug with Pro/E
|
|
94998 |
Adaptive Templates TNC - Modality causes missing coordinate - Profiling helical |
Fixed |
|
95017 |
5-Axis - C axis limit is exceeded on head/head machine and it does not retract |
Fixed |
|
95023 |
Insert merge & rationalise need to retain the original machine mating setup |
Original information now retained |
|
95029 |
Server Install - ToolStore_user error message during upgrade install |
Fixed by installing Server Install 2009R2 |
|
95052 |
Strategy Manager - German - List of Feature.Type is not offered |
Fixed |
|
95084 |
5-axis toolpath at wrong location after CPL change (Index) |
Fixed |
|
95095 |
ToolStore - Default priority is not passed to toolchange dialog at editing |
Fixed |
|
95103 |
Regression - Unwanted angular move in rotary planar/rotate |
Fixed |
|
95162 |
Unable to move relative (two) to or constrained on a turn feature |
Implemented |
|
95170 |
Ability to set privileges for licenses - group of users |
|
|
95172 |
5-axis and multiplane support for Huron-style rotary head (nutated) (orthogonal) |
Implemented in 2009R1 |
|
95182 |
Strategy Manager - German - TapDiameter does not accept a comparison |
Fixed |
|
95214 |
CAD Links Inventor (PM) - to bring OD/ID (external/internal) threads feature info |
Completed |
|
95232 |
Pro/E Granite - New Hole Feature not found due to incorrect visibility test |
This is a bug with Pro/E |
|
95236 |
Server Install - Toolstore_user error message during upgrade install |
Fixed by installing Server Install 2009R2 |
|
95327 |
5-axis and multiplane support for Huron-style rotary head (nutated) (orthogonal) |
Implemented in 2009R1 |
|
95388 |
Open Pockets - Flat Land Finishing to support them |
Implemented for the Flat Land Finishing cycle only |
|
95408 |
Regression - Unwanted angular move in rotary planar/rotate |
Fixed |
|
95424 |
Strategy Manager - German - List of Feature.Type is not offered |
Fixed |
|
95510 |
Regression - Unwanted angular move in rotary planar/rotate |
Fixed |
|
95552 |
Strategy Manager - German - TapDiameter does not accept a comparison |
Fixed |
|
95584 |
RMS Network License commuting fails on some PCs |
Fixed - Refer to Installation guide for details on the changes to the process for commuting licenses. |
|
95609 |
Roughing Spiral - Ramp approach when using Pre-Drill? |
Fixed |
|
95634 |
Templates Turn - Checking of sub-spindle movement control problem |
Fixed - Setting Both now skips the check. |
|
95747 |
Change on Tool Mode does not update Spindle Direction |
Fixed |
|
95781 |
Job Manager - Add [PROGID] and [PROGDESCR] to Job & Machine Parameters |
Fixed |
|
95825 |
Plunge Roughing - 3D solid model as Stock Type, as in Roughing |
Implemented. |
|
95838 |
Strategy Manager - German - List of Feature.Type is not offered |
Fixed |
|
95844 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
95855 |
Templates enhancement for tool hand and reversal to be passed to NC |
New tokens created and available in toolchange code constructors. |
|
95875 |
Milling and Turning - Rapid approach to avoid X and Z overtravel |
Implemented |
|
95947 |
Lathe Setup - No MAINPARTSTICKOUT and PARTLENGTH in machines without sub-spindle |
MAINPARTSTICKOUT is working, PARTLENGTH only works when you digitise the component for part transfer |
|
95963 |
Simulator - The direction of some index moves is incorrect wrong/side/solution |
Fixed |
|
96040 |
Japanese Edgecam - Problem with 'Force Upper Case' and Japanese text |
Fixed |
|
96065 |
Open Pockets - Flat Land Finishing to support them |
Implemented for Flat Land Finishing cycle only |
|
96084 |
Templates - TOKEN for tool units |
Completed |
|
96101 |
Rough Turn safe distance is always zero. (Canned cycle variable) |
XSAFE and ZSAFE variables are no longer reset to zero by New Rough Turn. |
|
96105 |
Geometry from solids - helical edge only has one turn - not complete - Parasolid |
Fixed |
|
96107 |
Milling and Turning - Rapid approach to avoid X and Z overtravel |
Implemented |
|
96108 |
Milling and Turning - Rapid approach to avoid X and Z overtravel |
Implemented |
|
96109 |
Milling and Turning - Rapid approach to avoid X and Z overtravel |
Implemented |
|
96110 |
Milling and Turning - Rapid approach to avoid X and Z overtravel |
Implemented |
|
96111 |
Milling and Turning - Rapid approach to avoid X and Z overtravel |
Implemented |
|
96112 |
Milling and Turning - Rapid approach to avoid X and Z overtravel |
Implemented |
|
96113 |
Milling and Turning - Rapid approach to avoid X and Z overtravel |
Implemented |
|
96114 |
Milling and Turning - Rapid approach to avoid X and Z overtravel |
Implemented |
|
96115 |
Milling and Turning - Rapid approach to avoid X and Z overtravel |
Implemented |
|
96200 |
Code Generator Mill - mill/turn regression - Rotary rotate goes wrong |
Fixed |
|
96204 |
Profiling - Apply Safe Distance does not work if linear lead is used |
Fixed |
|
96263 |
Regression - Unwanted angular move in rotary planar/rotate |
Fixed |
|
96269 |
5-axis and multiplane support for Huron-style rotary head (nutated) (orthogonal) |
Implemented in 2009R1 |
|
96304 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
96356 |
5-axis and multiplane support for Huron-style rotary head (nutated) (orthogonal) |
Implemented in 2009R1 |
|
96376 |
5-axis - Pivot point not applied on approach move |
Fixed |
|
96426 |
New Feature Finder - Digitise Facers) to support cylindrical and conical faces |
No longer required with the introduction of feature finding all holes |
|
96480 |
Templates NC - #ZMOVE not initialised for modality check from helical to circular |
Fixed |
|
96495 |
Templates - make number of Teeth available as token (modifier 130) |
Complete. Available as NUMBEROFTEETH code generator variable. |
|
96500 |
Templates TNC - #ZMOVE not initialised for modality check from helical to circular |
Fixed |
|
96545 |
Regression - Unwanted angular move in rotary planar/rotate |
Fixed |
|
96582 |
Template mill non-adaptive Siemens - Drilling forced longhand - regression |
Fixed |
|
96656 |
Hole Cycle - Wrong clearance in longhand - no canned |
Fixed |
|
96686 |
New Hole cycle - Non-associative level and associative depth gives wrong ZDEPTH |
Fixed |
|
96688 |
Templates Mill/turning - Option to force Rapid After Toolchange even if #MOVE=0 |
Complete - Option to force this is on Toolchange tab, default is Off |
|
96715 |
New Hole cycle - Radial holes wrongly oriented in hole array |
Fixed |
|
96716 |
New Hole cycle - Clearance incorrect on radial holes - non-associative |
Fixed |
|
96750 |
New Hole cycle - Non-associative level and associative depth gives wrong ZDEPTH |
Fixed |
|
96798 |
Templates Mill/turning - Option to force Rapid After Toolchange even if #MOVE=0 |
Complete - Option to force this is on Toolchange tab, default is Off |
|
96809 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
96812 |
Milling and Turning - Rapid approach to avoid X and Z overtravel |
Implemented |
|
96814 |
New Hole cycle - Non-associative level and associative depth gives wrong ZDEPTH |
Fixed |
|
96825 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
96832 |
How to define a B-45 Deg tool (left hand. D2.) |
Implemented |
|
96862 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
96871 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
96874 |
5-axis - Pivot point not applied on approach move |
Fixed |
|
96900 |
STEP translator fails to find features - Cylindrical faces are freeform - EC/PM |
STEP files that are saved as .pmods are no longer loaded into Edgecam as free form faces |
|
96901 |
STEP translator fails to find features - Cylindrical faces are freeform - EC/PM |
STEP files that are saved as .pmods are no longer loaded into Edgecam as free form faces |
|
96915 |
Code Generator Mill - mill/turn regression - Rotary rotate goes wrong |
Fixed |
|
96923 |
Simulator - The direction of some index moves is incorrect wrong/side/solution |
Fixed |
|
96926 |
Templates adaptive Mill TNC - Allow Forward and Reverse with coolant in tapping |
Completed |
|
96935 |
STEP translator fails to find features - Cylindrical faces are freeform - EC/PM |
STEP files that are saved as .pmods are no longer loaded into Edgecam as free form faces |
|
96959 |
Make tool tip angle available in Code Generator |
Completed - The tool angle can be output through variable INCLUDEDANGLE |
|
96988 |
Templates Mill - new hole cycle - does not move to clearance of next cycle |
Fixed - Needs the option 'always' in move to position before hole cycle, in order to give the correct output |
|
96997 |
Code Generator - User Q vars being seen in New Rough and Finish Turn |
Fixed |
|
97035 |
New turn features - Features fail on toroidal faces - regression nearly |
Fixed |
|
97073 |
Sort Priority not passed from ToolStore to Edgecam |
Completed |
|
97074 |
Sort Priority not passed from ToolStore to Edgecam |
Completed |
|
97075 |
Sort Priority not passed from ToolStore to Edgecam |
Completed |
|
97076 |
Sort Priority not passed from ToolStore to Edgecam |
Completed |
|
97077 |
Sort Priority not passed from ToolStore to Edgecam |
Completed |
|
97131 |
Inventor CAD Links - Thread not found on array |
Fixed |
|
97133 |
Templates Mill/turning - Option to force Rapid After Toolchange even if #MOVE=0 |
Complete - Option to force this is on Toolchange tab, default is Off |
|
97139 |
New Rough Turn - Canned cycle points order incorrect |
Fixed |
|
97149 |
New Rough Turn - Canned cycle points order incorrect |
Fixed |
|
97161 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
97190 |
Profiling - Short Link Step does not create good short links |
Fixed |
|
97199 |
Features - All features disappear from 3D view in manufacture |
Fixed |
|
97206 |
Sort Priority not passed from ToolStore to Edgecam |
Completed |
|
97210 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
97214 |
Profiling and Roughing - Do not follow Code Wizard's Rapid 3D Setting |
Completed |
|
97257 |
Profiling and Roughing - Do not follow Code Wizard's Rapid 3D Setting |
Completed |
|
97297 |
Templates Mill - #TMPCLEAR is wrongly handled in PT_ZCLEAR |
Fixed |
|
97340 |
Head/Table Index - Aligns CPL when not necessary |
Completed |
|
400888 |
Manual Hole Feature - Cannot create from partial cylinders anymore (regression) |
Fixed |
|
400965 |
ToolStore - Populating toolchange numeric fields in scientific notation |
Fixed |
|
401008 |
Solids - Slow performance rendering and Intellisnapping big files |
Edgecam 2009 R2 is much faster when Intellisnapping big files, specially Granite (Pro/E) models. |
|
401064 |
How to define a B-45 Deg tool (left hand. D2.) |
Implemented |
|
401105 |
Parting Off operation - To use XTOOL instead of XHOME in safe approach |
Changed the behaviour of the operation so that now the tool just goes to the Z position, without changing X axis |
|
401264 |
Sort Priority not passed from ToolStore to Edgecam |
Completed |
|
401273 |
Rename Containment to Boundary on cycles coord input |
Fixed |
|
401296 |
Lathe Setup - Selection of STL stock |
Implemented |
|
401349 |
Spindle Priority control - Wrong variable in sub-spindle priority |
Fixed - Procedure only present in the Okuma templates |
|
401403 |
Profiling 2D - With XY offset applied get round corners only |
Profiling now corners correctly |
|
401538 |
Simulator - Option to remove chips - choose side of the stock |
New options to remove waste stock added |
|
401649 |
Option for %output to use dot . instead of dash - |
Implemented |
|
401651 |
Templates - Enhancement for tool hand and reversal to be passed to NC |
New tokens created and available in toolchange code constructors |
|
401708 |
Roughing - Avoid rollover does not work if XY offset is specified |
Fixed |
|
401715 |
Code Generator variable MAXRPM, default set incorrectly for turn tool |
Fixed |
|
401965 |
Rough Groove - Additional cut order - 1 4 2 5 3 (full cuts then thins) |
Implemented "Sequential Castellation" as a new cycle strategy |
|
402010 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
402050 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
402219 |
New Rough Turn - Implement compensation options |
Implemented |
|
402264 |
5-axis cycle - Toolpath changes on strategy change/reverse |
If you edit the cycle and change to Parallel Surface, the field 'Angle from Z' becomes unavailable. Once you return, this field will reset to blank. Blank means 90 and therefore the toolpath will be OK. |
|
402491 |
Code Generator Compiler Help - Changes in MM (Machine Details Line) |
Fixed |
|
402505 |
Sort Priority not passed from ToolStore to Edgecam |
Completed |
|
402700 |
Feature Find - 5-axis holes - to be found in a AFR manner |
Implemented |
|
402710 |
New Rough Turn - Canned cycle points order incorrect |
Fixed |
|
402948 |
New Rough Turn - Implement compensation options |
Implemented |
|
402965 |
Code Wizard - Axis limits not being saved (Head/Head) |
Fixed |
|
403146 |
Flat Face Features - Implement manual flat face features |
Completed |
|
403677 |
Profiling - Lead Out gouges solid part with offset |
Fixed |
|
403727 |
Templates Turn - X start position in rough turn does not follow diametral setting |
Fixed |
|
403775 |
RMS Standalone - Illegal copy of the software |
Fixed |
|
403797 |
Insert merge & rationalise need to retain the original machine mating setup |
Original information now retained |
|
403805 |
Rough Groove - Additional cut order - 1 4 2 5 3 (full cuts then thins) |
Implemented "Sequential Castellation" as a new cycle strategy |
|
403883 |
Sort Priority not passed from ToolStore to Edgecam |
Completed |
|
403949 |
Regression - Code Generator crashes with rotary rotate |
Fixed |
|
404048 |
Toolchange dialog - Associative ON prevents CLW and CCLW with coolant |
Fixed |
|
404058 |
Sort Priority not passed from ToolStore to Edgecam |
Completed |
|
404157 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
404158 |
Spindle Priority - Wrong DIRECTION and CSS vars in non-controlled turret |
Fixed |
|
404167 |
CAD Links regression - Brings only one co-ordinate system from SolidWorks |
Fixed |
|
404195 |
Code Wizard - Axis limits not being saved (Head/Head) |
Fixed |
|
404243 |
Insert merge & rationalise need to retain the original machine mating setup |
Original information now retained |
|
404381 |
Finish Turning - Not machining to the end of geometry |
|
|
404479 |
Too many G00 moves between cuts in 4 axis simultaneous mill turn |
|
|
404496 |
Manual Hole Feature - Cannot create from partial cylinders anymore (regression) |
Fixed |
|
404562 |
CAD Links Inventor (PM) - To bring OD/ID (external/internal) threads feature info |
Completed |
|
404615 |
Face Mill - Included angle and small diameter are greyed out on 2009 R1 |
Fixed |
|
404626 |
ToolStore - Multi-user Edits create new Insert/New Material record |
Fixed |
|
404700 |
Manual Hole Feature - Cannot create from partial cylinders anymore (regression) |
Fixed |
|
404705 |
Regression - Time to load big 5-axis part increased many times |
The part file holds more information than 12.50. Reduced time in R2. Times 12.5=12sec 2009R1=70sec 2009R2=27sec |
|
404708 |
File size changed from 12.50.2 to 2009R1 (35% bigger) |
We are storing more data in the toolpath. This is an exceptional case. |
|
404709 |
Parting Off Operation - If previous tool was a driven, dig point is doubled (DIA |
Fixed |
|
404746 |
Manual Hole Feature - cannot create from partial cylinders anymore (regression) |
Fixed |
|
404800 |
Solids - Slow performance rendering and Intellisnapping big files |
Edgecam 2009 R2 is much faster when Intellisnapping big files, specially Granite (Pro/E) models. |
|
404844 |
Toolchange dialog - Associative ON prevents CLW and CCLW with coolant |
Fixed |
|
404863 |
Rationalise - Mating location/CPL are lost from original sequence - regression |
Fixed |
|
404881 |
Toolkit Assistant regression - Filtered job is not assigned to the tool (edit) |
Fixed |
|
404948 |
New example parts ask for non-shipped post |
|
|
404969 |
Head/Table Index - Aligns CPL when not necessary |
Completed |
|
404971 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
405080 |
New Hole cycle - Associative clearance incorrect with level 0 |
Fixed |
|
405086 |
Technology Assistant help - German version has more topics than English version |
Fixed |
|
405093 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
405094 |
Installation Guide - To mention NetHASP does not support Win Server 2008 x64 |
Installation Guide updated |
|
405179 |
Finish Turning - Direct rapid approach type option required |
Direct Rapid Approach option implemented |
|
405184 |
Profiling CRC Solids - Compensation backoffset toolpath gouges part |
Fixed |
|
405384 |
ToolStore & Job Manager - To add Holder Type column |
Added |
|
405427 |
Manual Hole Feature - Cannot create from partial cylinders anymore (regression) |
Fixed |
|
405491 |
STEP translator fails to find features - Cylindrical faces are freeform - EC/PM |
STEP files that are saved as .pmods are no longer loaded into Edgecam as free form faces |
|
405576 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
405622 |
Flat Land Finishing - Remove rolling around edges (rollover) |
Fixed for 2009R2 |
|
405698 |
Templates TNC - Change default content of helical code constructor |
Default content changed as in iTNC530 manual. Previous post will not be affected. |
|
405846 |
Templates - Make number of teeth available as token (modifier 130) |
Complete - Available as NUMBEROFTEETH code generator variable |
|
405900 |
Strategy Manager - Flat face section not translated |
Fixed |
|
405948 |
Update stock - Current stock option is ignored in the Rough Turn cycle |
Fixed |
|
406095 |
New Rough Turn - Unable to change perpendicular lead parameter |
Fixed |
|
406182 |
5-axis - Approach/lead gouges part |
Fixed |
|
406198 |
Installation Guide - Revoke location (path) is wrong |
Fixed |
|
406198 |
Installation Guide - Include reference to non-English systems |
Installation Guide updated |
|
406389 |
Regression - Code generator crashes with rotary rotate |
Fixed |
|
406399 |
Regression - Code generator crashes with rotary rotate |
Fixed |
|
406482 |
Simulator - Option to remove chips - choose side of the stock |
New options to remove waste stock added |
|
406483 |
Simulator regression - Bad simulation if index command is before the tool |
Fixed |
|
406783 |
STEP translator fails to find features - Cylindrical faces are freeform - EC/PM |
STEP files that are saved as .pmods are no longer loaded into Edgecam as free form faces |
|
406822 |
Regression - Code Generator crashes with rotary rotate |
Fixed |
|
406848 |
ToolStore - Materials not in list (deleted?) are shown in Technology Assistant |
Fixed |
|
406965 |
Manual Hole Feature - Cannot create from partial cylinders anymore (regression) |
Fixed |
|
406982 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
406992 |
New Hole Cycle - Mill/turn radial holes wrapped data incorrect |
Fixed |
|
406999 |
Insert Component crashes Edgecam - features in the bin |
Fixed |
|
407101 |
Regression - Code generator crashes with rotary rotate |
Fixed |
|
407156 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
407161 |
Templates Turn - X start position in rough turn does not follow diametral setting |
Fixed |
|
407168 |
Code Generator - User Q vars being seen in New Rough and Finish Turn |
Fixed |
|
407286 |
Insert Component crashes Edgecam - Features in the Bin |
Fixed |
|
407332 |
New Rough Turn - Unable to change perpendicular lead parameter |
Fixed |
|
407337 |
New Rough Turn - Cycle does not machine the whole bore due to Use Current Stock |
Fixed |
|
407363 |
Insert Component crashes Edgecam - Features in the Bin |
Fixed |
|
407385 |
Speed up AutoSave in Edgecam |
Autosave now caches solids to improve performance |
|
407393 |
New Rough Turn - Cycle does not machine the whole bore due to Use Current Stock |
Fixed |
|
407498 |
Sort Priority not passed from ToolStore to Edgecam |
Completed |
|
407598 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
407758 |
Face Mill - Included angle and small diameter are greyed out on 2009 R1 |
Fixed |
|
407798 |
Simulator regression - Bad simulation if index command is before the tool |
Fixed |
|
407801 |
Drilling tool - Missing the mm/u field in German translation |
Fixed |
|
407856 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
407859 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
407891 |
ToolStore - General tab on tool properties page does not update with static change |
Completed |
|
407917 |
Rough - Avoid Rollover - Entries/exits roll over and are not straight |
Fixed |
|
407918 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
407919 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
407923 |
Regression - Unwanted angular move in rotary planar/rotate |
Fixed |
|
408002 |
New Rough Turn - Unable to change perpendicular lead parameter |
Fixed |
|
408030 |
Code Wizard - Axis limits not being saved (Head/Head) |
Fixed |
|
408047 |
PCI - %query to populate the solid's full address to [&SOLIDPATH] |
Completed |
|
408108 |
Helical Hole Cycle - HOLEDIAM variable does not work with more than one cycle |
Fixed |
|
408122 |
Reload behaviour is strange on attached part - changes afterwards |
Fixed |
|
408213 |
Lathe Setup - Copy the main spindle CPLs to the sub-spindle |
The "Index to" CPLs are copied to the sub-spindle. |
|
408218 |
Unable to move relative (two) to or constrained on a turn feature |
Implemented |
|
408261 |
Templates Mill - Radial first hole have swapped co-ordinate in subroutine |
Fixed |
|
408323 |
Profiling 2D - With XY offset applied get round corners only |
Profiling now corners correctly |
|
408343 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
408366 |
Simulator - The direction of some index moves is incorrect wrong/side/solution |
Fixed |
|
408441 |
Okuma Template - #TOTALDEPTH to be diametral |
Done - Token [THRDTOTDEPTH] should contain the radial value, [THRDTOTDEPTHDIAM] should contain the diametral value. |
|
408441 |
Okuma Template - Canned Cycle is 71 instead of 76 |
Completed |
|
408441 |
Okuma Template - Changes to the format table |
Completed |
|
408859 |
5-Axis - Cache problems may cause the cycle to fail |
Fixed |
|
408950 |
Templates TNC - Problem in adjust arc centre procedure |
Fixed |
|
409018 |
5-Axis - Cache problems may cause the cycle to fail |
Fixed |
|
409043 |
Regression - 5-Axis - Silent failure causes cache to fail |
|
|
409050 |
Rough Groove - Additional cut order - 1 4 2 5 3 (full cuts then thins) |
Implemented "Sequential Castellation" as a new cycle strategy |
|
409091 |
Rough Turn safe distance is always zero. (Canned cycle variable) |
XSAFE and ZSAFE variables are no longer reset to zero by New Rough Turn |
|
409151 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
409153 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
409154 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
409156 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
409157 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
409158 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
409159 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
409160 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
409163 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
409164 |
Simulator - Tools incorrectly orientated using initial CPL inv turn and B axis |
Fixed |
|
409225 |
Some words are translated to Japanese in Strategy Manager |
|
|
409346 |
Toolkit Assistant/ToolStore - Sometimes comment on a new tool will disappear |
Fixed |
|
409547 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
409559 |
New Rough Turn - Cycle does not machine the whole bore due to Use Current Stock |
Fixed |
|
409773 |
Toolkit Assistant/ToolStore - Sometimes comment on a new tool will disappear |
Fixed |
|
409901 |
Code Generator - User Q vars from macro 130 affecting lathe setup instruction |
Fixed |
|
409917 |
Advanced Turning - Add safe docking positional command for upper/lower turrets |
Implemented |
|
410145 |
Regression - Unwanted angular move in rotary planar/rotate |
Fixed |
|
410297 |
5-axis - Rapid repositioning goes the longest path on a head/table |
Fixed |
|
410471 |
Delete CPL causes error in cross referencing part file |
Fixed |
|
410684 |
Support for CATIA V5 R19 files |
Implemented |
|
410788 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
410844 |
CAD Links - Add support for 64-bit software [SolidWorks/Inventor] |
Edgecam CAD Links 2009.20 64-bit version implemented |
|
410869 |
Templates turn - To set #MACRO in bar feed macro |
Macros: 103, 104, 105, 106, 108, 109, 113, 117 do now also set #MACRO to the respective value. Post writers should check their posts that can contain customisation based on #MACRO. |
|
410958 |
Delete CPL causes error in cross referencing part file |
Fixed |
|
411004 |
Some words are translated to Japanese in Strategy Manager |
|
|
411006 |
Japanese Strategy Manager - Feature.Orientation=RADIAL |
Fixed |
|
411560 |
Face Milling Help - Remove phrase about cuts been parallel to the edge |
|
|
411666 |
Code Generator - User Q vars being seen in New Rough and Finish Turn |
Fixed |
|
411666 |
Code Generator - User Q vars from macro 130 affecting lathe setup instruction |
Fixed |
|
411846 |
Code Generator - User Q vars being seen in New Rough and Finish Turn |
Fixed |
|
411925 |
Code Generator - User Q vars being seen in New Rough and Finish Turn |
Fixed |
|
411925 |
Code Generator - User Q vars from macro 130 affecting lathe setup instruction |
Fixed |
|
411956 |
Some words are translated to Japanese in Strategy Manager |
|
|
411999 |
5-axis - Rapid moves between cycle generates wrong coords - gouges |
|
|
412021 |
Help File - Remove PAMS references |
Completed |
|
412158 |
Template Okuma - 2cyb - No format for [BAXBRAKE-OFF] |
Fixed - BAXBRAKE-OFF now uses same format as BAXBRAKE-ON |
|
412256 |
Template Okuma - Using CMOVE tokens twice |
Fixed - Extra tokens removed from default content |
|
412330 |
Delete CPL causes error in cross referencing part file |
Fixed |
|
412417 |
German Translation - IGES Import - 'Subfigure Instances' not translated |
|
|
412674 |
5-Axis - Retract Distance appears hard coded |
Fixed |
|
412779 |
Support for CATIA V5 R19 files |
Implemented |
|
412810 |
Support for CATIA V5 R19 files |
Implemented |
|
412811 |
Support for CATIA V5 R19 files |
Implemented |
|
412814 |
Support for CATIA V5 R19 files |
Implemented |
|
412815 |
Support for CATIA V5 R19 files |
Implemented |
|
412816 |
Support for CATIA V5 R19 files |
Implemented |
|
412894 |
Turning - Hand of tool does "mirror" the co-ordinates produced |
|
|
412945 |
5 Axis - Retract Distance appears hard coded |
Fixed |
|
|
Z Level cycle slow with very fine tolerance (e.g. 0.001) |
The new cycle is now 4 to 5 times quicker |
|
|
Enhancement - Move Relative in turn to work with features |
Implemented |
|
|
Q vars do not appear on new Profiling command |
|
|
|
CAD Links - Example Structure for XML - internal and external documentation |
Done |
|
|
New Rough Turn - 45 degree lead out on OD. Avoid rings |
Implemented |
|
|
Rest Finish - Steep Shallow creates additional pass around the part |
Fixed |
|
|
The pull down Manual Feature icon for Hole is the old Hole feature |
Fixed |
|
|
Job Reports - Add 'Holder Type' to mounting page |
Completed |
|
|
Template TNC - CYCLDEF204 for back bore |
Completed |
|
|
Rough - Avoid Rollover - entry/exit are not straight |
Fixed |
|
|
Templates - Configure Integrex Fusion helical hole cycle |
Completed |
|
|
New Rough Turn - Stock runout machines past the C/L when using current stock |
The Rough Boring cycle no longer machines past the C/L. The stock runout can be controlled with a Z termination. |
|
|
Groove features - Invalid front turn groove found on the attached part |
Fixed |
|
|
New Rough Turn - Link moves are random when using current stock |
Fixed |
|
|
Document Feature XML format so 3rd parties can develop CAD Links |
Completed |
|
|
Strategy Manager - Implement new run-only module license |
New run-only Strategy Manager license introduced (ENSTR-R) |
|
|
Ability to define a taper reamer in the ToolStore and Edgecam |
Fixed |
|
|
Code Generator - Concatenate 2 or more strings |
Fixed |
|
|
Feedback Window - Show how many features in the bin after AFR |
Implemented |
|
|
5-axis - Part coords on a CPL not Initial are incorrect |
|
|
|
Job Manager / reports - Add part stick out to job manager & job reports |
Part Stickout added to Job Manager/Job Reports |
|
|
Unnecessary references to "Edgecam" still in UI |
Fixed |
|
|
ToolStore/Strategy Manager - Ability to set if a turning tool is for roughing or finishing |
Added ability in ToolStore to state if a tool is for roughing, finishing or general use (roughing and finishing) |
|
|
Memory not cleared after regen and crashes when reaches 1.7GB (PMI) |
|
|
|
Bar Feed code constructor - Convert output to source variables |
Completed |
|
|
Feed type modality works in mill but not turn environment |
Fixed |
|
|
Templates - Add whiteboard procedure to extend use of Attribute macro |
Completed - New extension created |
|
|
Regression - Cannot Intellisnap on the origin |
Fixed |
|
|
Spindle direction should take axial/reverse axial into account |
Fixed |
|
|
Regression - Insert component - CPLs are not available to <digitise> |
Fixed |
|
|
Roughing operation to take flat face features as a valid entity |
Fixed |
|
|
Check Fixtures - Offset is applied to the part where it should not be |
Fixed |
|
|
Delete duplicate through hole features using the 'Digitise Face(s)' option |
Implemented - Digitise Face(s) option to delete duplicate holes found from the opposite direction. |
|
|
Groove feature - Base width is sometimes incorrect |
Fixed |
|
|
CAD Links - 64-bit cannot be uninstalled or does not show on Control Panel |
Fixed |
|
|
New Rough Turn - Facing cut way passed centre (regression) |
Fixed |
|
|
Coord input wrong when view is not aligned to CPL (regression) |
Fixed |
|
|
Roughing - Flat face features -Toolpath is offset outside of the feature |
Fixed |
|
|
Strategy Manager - Toolkit gauge distances are not pulled through to CAM |
Fixed |
|
|
Template Okuma - Thread token changes |
Completed. New tokens created. User should use the radial ones, or the diametral ones. The use of both will cause duplicated data. |
|
|
Edgecam file type filter ppf displays no files. |
Fixed |
|
|
Update Stock - Add a 'Rapid Results' option to the Update Stock dialog |
Use Rapid Results option added to the Update Stock dialog |
|
|
Empty ToolStore does not create a new tool correctly (Probe issue) |
Fixed |
|
|
Milling cutter spindle tab - CSS check box is available in the milling environment |
Fixed |
|
|
Face Milling a flat face feature with associative level gives a Z toolpath offset |
Fixed |
|
|
Strategy Manager - Fails to convert older files and corrupts them |
Fixed |
|
|
Prevent deleting CPLs still in blocks created from instructions |
Fixed |
|
|
Simulator - After bar pull simulation goes wrong |
Fixed |
|
|
Templates - Add position indicator token to Turret Park |
Implemented. New tab in NC/Style in tokens in Turret Park code constructors. |
|
|
New turn features - Regression - Geometry is up to 0.1 different in R2 |
|
|
|
Rough Turn - Make offset modifiers modal |
|
|
|
Simulator - Rapid 3D off gives wrong results |
|